UPS needs to be installed on systems that have the
maximum urgency in operational purposes. These equipments are widely used for
computers, data centers, technological and industrial areas. This minimizes the
maximum chances of huge data loss. Nowadays, it has become important as it
provides instantaneous power switchover easily when there is any type of power
failures.
Types
of UPS
Single
Phase UPS
A single phase UPS will protect your equipments that
is operating on standard AC mains, termed as single phase. This is mostly used
in homes and small offices. However, if you need power supple in a huge data
collection centre, large industry and factories then it is a 3 phase
installation.
Therefore you will certainly need 3 phase UPS which
can provide more power in case of accidents. Most of the UPS providers supply
all types of phases of UPS, depending on the power ratings. You must consult
and be sure of your specified needs before purchasing.
Heavy
Scale UPS
A heavy scale UPS are widely used in
telecommunications, hospitals, military areas, and data centers where the risk
is higher. A disruption or termination can generate huge loss therefore UPS is
mandatory in these fields. These types of UPS are more than the usual back up
ones. Not only in blackouts but also they work as a support system to the large
scale machineries in case of voltage fluctuations and malfunction.
UPS
as per different categories
Online
An online or double conversion UPS is specially
designed to protective sensitive equipment that can be damaged or give low
output in case of excessive voltage and electric fluctuations. The output voltage
is maintained in sync with the frequency, so that it doesn’t exceed the strict
off limits.
Standby
UPS
Standbypower supplies are commonly termed as offline system and provide the basic power
protection to the devices. It also provides a surge protection and battery
backup when the input voltage drops below the normal level. The normal level is
preset and do not exceed the limitation. As a result, the device runs on smooth
power.
Whatever your UPS requirement is make sure you
evaluate the power consumption, before buying a system.
0 comments:
Post a Comment